Slip Ring Continuous Rotation Pan Tilt Servo

Rotary Slip Rings - Features:

Voltage: 240 VDC / 240 VAC max
Cables: silver plated - PTFE insulation and color coded
6A: AWG18; 2A: AWG26 or AWG28
Cable length: 300 mm. standard (other lengths on demand)
Dielectric strength: 500 VAC at 60 Hz
Insulation resistance: > 1000 MOhm / 500 Vcc
Noise: < 100 mOhm at 6 Vcc and 50 mA (at 5 rpm)
Nominal speed: 250 rpm (for higher speed
up to 600 rpm/min please contact us)
Temperature: -20 Celsia to +80 Celsia
Bearings: miniature, precision ball bearings
Mounting method: standard flange
Contact: gold to gold
Rating life: 10⁸ revolutions (depending on speed
and on environmental conditions)
Protection: IP 51
No lubrication required

Slip Rings Rotary Joint - Description :

Slip rings can be used in any electromechanical system requiring unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure.

A slip ring is also called rotary electrical interface, collector, swivel or rotary joint.

slip ring principle

The KS Series make use of a special technology allowing to get multiple contact points between brushes and ring, low friction torque, reduced mechanical noise and low wear.

Slip Rings can be used in any system requiring the transmission of electrical and/or power signals to an intermittently or continuously rotating shaft. Thanks to the small ring diameter, the KS Series grants low peripheral speed between brushes and rings, as well as reduced dynamic imbalance what means very low wear. Moreover, the use of noble metals (gold to gold alloy) assures long lasting using life, reduced noises and interferences between circuits, low friction torque.

The above features make the KS Series specially suited to transmission of critical signals, such as hi frequency signals (video, field buses, etc.), very low currents and voltages (strain gages, thermocouples, measuring equipment etc.), even if versions with up to 6A circuits are available.

Conceived to deliver a flexible, cost-effective, reliable and hi-quality solution, these units are available in many standard configurations and with 6 to 56 circuits. Their compact size allows installation into small systems thus requiring high performances. The KS Series can easily meet the needs of particular applications and also be customized on demand (connectors, cables length, special cables, number of circuits, etc.).

Solid Shaft Rotary Slip Rings

Solid Shaft Slip Ring - No Hole Through

Slip Rings - Current Transfer Capacity

Model	N1 x Number of Rings	Ampers per Ring [A]	N2 x Number of Rings	Ampers per Ring [A]	Total Number of Rings	Total Ampers Transfer [A]	Outer Diameter [mm]	Inner Hole Diameter [mm]	Length [mm]	On Stock	Request Quote	Datasheet
KS05-4x1A	4	1			1	4	5,9	0	5,9
KS05-4x8A	8	1			1	8	5,9	0	5,9
KS06-4x8A	8	1			1	8	6,5	0	6,5
KS11-4x6A	6	1			1	6	11	0	11
KS12-3x2A	3	2			3	6	12	0	14	ano
KS12-6x2A	6	2			6	12	12	0	14	ano
KS12-12x2A	12	2			12	24	12	0	19,5	ano
KS12-18x2A	18	2			18	36	12	0	23	ano
KS22-6x2A	6	2			6	12	22	0	19	ano
KS22-12x2A	12	2			12	24	22	0	28	ano
KS22-2x6A-2x2A	2	2	2	6	4	16	22	0	28
KS22-18x2A	18	2			18	36	22	0	34	ano
KS22-24x2A	24	2			24	48	22	0	42	ano
KS22-36x2A	36	2			36	72	22	0	57
KS25-36x2A	36	2			36	72	25	0	60
KS25-56x2A	56	2			56	112	25	0	86
KS32-2x14A			2	14	2	28	32	0	28	ano
KS32-3x14A			3	14	3	42	32	0	28	ano
KS32-2x14A-2x2A	2	2	2	14	4	32	32	0	28	ano
KS45-6x20A-2x5A	2	5	6	20	8	130	45	0	64,5
KS22W-3x4A	3	4			3	12	22	0	21
KS22W-3x8A	3	8			3	24	22	0	29
KS22W-3x10A	3	10			3	30	22	0	35
KS22W-3x20A	3	20			3	60	22	0	43

Delivery Stock Items 1week. Non Stock Items and Custom Slip Rings 4weeks.

Solid Shaft Slip Rings Mounting:

How To Mount

Request a Quote for Solid Shaft Rotary Slip Rings:

Please specify Number of Wires, Current (Ampers) and Voltage Needed, also if nesceary speed of rotation and environmental protection. For High Speed Data Transfer : frequency in MHz or transfer rate in Mbps.

Request Quote

Hollow Shaft Rotary Slip Rings:

Hollow Shaft Rotary Slip Rings

Hollow Shaft Slip Rings - Transfer Capacity

Model	N1 x Number of Rings	Ampers per Ring [A]	N2 x Number of Rings	Ampers per Ring [A]	Total Number of Rings	Total Ampers Transfer [A]	Outer Diameter [mm]	Inner Hole Diameter [mm]	Length [mm]	On Stock	Request Quote	Datasheet
KS54-D12-6x5A	6	5			6	30	54	12	34	yes
KS54-D12-12x5A	12	5			12	60	54	12	48	yes
KS54-D12-18x5A	18	5			18	90	54	12	62	yes
KS54-D12-24x5A	24	5			24	120	54	12	76	yes
KS78-D25-6x15A	6	15		2	6	90	78	25	47
KS78-D25-48x2A		15	48	2	48	96	78	25	119
KS99-D38-6x15A	6	15		2	6	90	99	38	45
KS99-D38-48x2A		15	48	2	48	96	99	38	117
KS120-D50-6x15A	6	15		5	6	90	120	50	61
KS120-D50-72x5A		15	72	5	72	360	120	50	211
KS135-D60-96x10A	96	10			96	960	135	60	on request			-
KS155-D70-96x10A	96	10			96	960	155	70	on request			-
KS180-D80-96x10A	96	10			96	960	180	80	on request			-
KS195-D90-96x10A	96	10			96	960	195	90	on request			-
KS203-D100-96x10A	96	10			96	960	203	100	on request			-
KS1000-D206-96x10A	96	10			96	960	1000	230	on request			-

Hollow Shaft Slip Rings Mounting:

How To Mount

Request a Quote for Hollow Shaft Rotary Slip Rings:

Please specify inner hole diameter, number of wires, current (Ampers) and voltage needed, also if nescesary speed of rotation and environmental protection. For High Speed Data Transfer : frequency in MHz or transfer rate in Mbps.

Request Quote

Fiber optics rotary joint - High speed data and video transfer

Special Slip Rings are used for transfer of high frequency signals or high speed data. Combination of electric and optics (Fiber Optics Rotary Junction) allows achieve speeds up to GHz or Gbps in one simple package.

For more informations, please contact us.

For inspection robots, where is not possible to use long and heavy electric cable, its very convinient to use an optical cable for video transfer. Also slip ring allows rotary camera to get a 360° picture.